Scanning Laser | ScanSet
ScanSet + SinglePoint Laser = Scanning LaserWorks with all available SinglePoint Laser
Existing/Old SinglePoint Laser can be reused
Pricing at less than 50% of available scanning systems on the market
Hightech Innovation Made in Germany
Scanning Laser Doppler Vibrometer
The laser beam of the Scanning LaserScanSet Components1 Doppler Vibrometer is deflected by two mirrors which are controlled by a computer. A built-in camera delivers the picture of the object under test. On this picture, the measurement points can be arranged with CAD software. After the initial setup of the points, the measurement is done automatically by the computer. Nearly all components of a conventional Scanning Laser Vibrometer are built in a optical unit that is structurally complex and therefore expensive. The Vibrolaser ScanSet now overcomes this restrictions and delivers a very high level of performance in measuring. And it simply upgrades an existing single-point laser vibrometer to a fully equipped scanning laser vibrometer system. Simply fix your existing Laser Vibrometer (or a new one by your choice) with the quick release clamps, adjust the mirror unit by the linear slides, and you are ready for the measurement. The VibroLaser ScanSet is shipped with a Data Acquisition with 4 analog input channels to measure the laser and reference signals. The user-friendly measurement and analysis software quickly processes the vibrations data, graphical display, and animations. VibroLaser Scanset Components:
ScanSet with mirrors, camera and support for the SinglePoint Laser
Controller including 4 channel data acquisition
Control and Analysis Software
Single point Laser Doppler Vibrometer (optional)
ScanSet
The VibroLaser ScanSet is manufactured from robust aluminium, and has next to the high precision laser deflection unit a CCD-Camera for photo realistic capture of the measurement object. To ensure that the laser beam of any usual Laser-Vibro meter exactly hits the mirror axis in zero position, the VibroLaser ScanSet offers linear slides that can be easily fixed by clamping lever to en sure a precise and reliable laser positioning. Using a ScanSet for measuring the signal quality is only dependant on the specifications and quality of the used Laser Doppler Vibrometer. The electrical connection to the controller is simply realized by a single cable that also supplies the mirrors with power, takes care about the mirror and camera steering and carries the measurement data and CCD-Camera Signals.
Controller
The controller includes next to the power supplies, an electrical component to steer the mirrors an a data acquisition system to digitize the vibration signals. The controller has a direct connector for the central cable to the ScanSet, BNC connectors for the input channels and the generator output and one USB connector to communicate with measurement PC. The Notebook/PC is only connected with one USB-cable for mirror and CCD-Camera steering, vibration data an video stream.
Data Acquisition:
-
- Channels:
- A/D converter:
- Frequency ranges:
- Frequency resolution:
- Input ranges:
- Coupling:
- Anti-Aliasing Filter:
- Generator output:
-
- 4 synchronous analogue input channels
- 24 Bit resolution
- 1Hz to 20 kHz selectable in 1,2,5,10 steps
- max. 25600 Frequency lines
- ±1V or ±10V selectable
- AC, DC, ICP Supply (2…4mA)
- Delta Sigma, adjusted to frequency range
- Sine, Chirp, Noise and Step-sine
Software
The measurement and analysis software includes all necessary modules to do complete scanning jobs such as:
CCD-Picture capture, Live Display
Geometry and Measurement Point Editor
FFT Analyzer with extensive functionality
Mirror control and steering
Operation Deflection shapes (ODS)
Animation, AVI-Export,UFF– , ASCII– and MatLab- Export
Free Offline-Version to use in office
Modal analysis module optional
Operation system Windows7
